Dollfie Dream(R) > Support > How to handle DD-f³

support

How to handle DD-f³

Precautions in attaching and detaching parts

Detaching “upper / lower arm part” and “thigh part”

① Hold each part as shown in the images above.
② Pull it straight in the direction of the arrow and take it off.

↑ Page Top

Attaching “upper / lower arm part” and “thigh part”

Insert a protruding part into a hole of the internal frame.

* A joint part is connecting right / left thighs.

↑ Page Top


Enhance the retention by tightening the screws

DD-f³ can keep its ideal posing performances for a long time by tightening the screws of the joints.
* Tighten the screws gradually: be careful not to damage the frame by tightening screws too much.
* When you find it difficult to detach a part, heat it with a hair dryer.

Neck: the first joint

① Take off the both arms.

② Take off the head.
  * Be careful: the neck shaft is curved. Take off the head while holding the neck firmly.
③ Take off the upper torso from the frame.
④ Tighten the screw until the neck gets an ideal posing ability.

↑ Page Top

Neck: the second joint

① Take off the both arms.

② Take off the head.
  * Be careful: the neck shaft is curved. Take off the head while holding the neck firmly.
③ Take off the upper torso from the frame.
  * Hold the frame firmly in order not to make it fall out.

④ Remove the shoulder joint screws and take off the shoulder frames.
⑤ Tighten the screw until the neck gets an ideal posing ability.

↑ Page Top

Shoulders: the first joints

① Take off the both arms.

② Take off the upper torso from the frame.
③ Tighten the screws until the shoulders get an ideal posing ability.

↑ Page Top

Shoulders: the second joints

① Take off the both arms.

② Take off the lower arm from the upper arm.
③ Push the upper arm frame downward and take it off.
④ Tighten the screws until the shoulders get an ideal posing ability.

↑ Page Top

Body: the first joint

① Take off the both arms.

② Take off the head.
  * Be careful: the neck shaft is curved. Take off the head while holding the neck firmly.
③ Take off the upper torso from the frame.
④ Tighten the screw until the body gets an ideal posing ability.

↑ Page Top

Body: the second joint

① While holding the lower torso, take off the upper torso together with the frame.

② Take off the both thigh parts.
③ Take the frame out of the lower torso.
④ Tighten the screw until the body gets an ideal posing ability.

↑ Page Top

Body: the third joint

① While holding the lower torso, take off the upper torso together with the frame.

② Take off the both thigh parts.
③ Take the frame out of the lower torso.
④ Tighten the screw until the body gets an ideal posing ability.

↑ Page Top

Hip joints

① Take off the thigh part.

② Take off the shin part together with the frame.

③ Take the frame out of the thigh part.
④ Tighten the screws until the body gets an ideal posing ability.

↑ Page Top

Thigh connecting parts

① Take off the thigh part.

② Take off the shin part.
③ Tighten the screws until the thighs get an ideal posing ability.

↑ Page Top

Knee joints

① Take off the thigh part.

② Take off the shin part together with the frame.

③ Take off the foot part.
④ Take off the outer part of the shin.
⑤ Tighten the screws until the knees get an ideal posing ability.

↑ Page Top

Ankle joints

① Take off the foot part.
② Take off the outer part.
③ Tighten the screws until the ankles get an ideal posing ability.

↑ Page Top

* Tighten the screws gradually: be careful not to damage the frame by tightening screws too much.
* When you find it difficult to detach a part, heat it with a hair dryer.

↑ Page Top