The “DD Base BodyIII” is designed to be easy-to-disassemble, and to exchange parts. The Internal Frames are incorporated into parts, so there is no need to remove the Internal Frames from the inside.
* The body pictured is the DDS Body. The DD Base BodyIII, DDdy Base BodyIII, and MDD Base BodyIII have almost the same structures as DDS.
* The body structure may change without notice.
* Click here to learn “How to Exchange the Eyes”
The skin of Dollfie Dream® is very delicate, there is a possibility that colors from outfits will stain their skin.
To prevent and avoid color staining, change their outfits frequently. If you are unsure about the outfit, test the outfit on a hidden area of your DD for staining before putting it on.
* For more details, please check this page.
Remove the head by firmly holding the ball of the internal frame in the upper part of the neck while gently wiggling the head off the protruding head attachment.
To remove the hands - pull straight while holding the ball part on the wrist. With the hands detached, it makes it easier to change outfits.
After removing the head and arms, pull bust upwards to remove it.
* You do not need to remove the frame when exchanging busts.
★Bust Internal Frame
Pull it upwards, to remove it. If it is difficult to remove, slightly wiggle the frame when pulling upwards. Be gentle during removal to avoid damage. When attaching the frame, pay attention to its direction.
Pull the Bust Part upwards to remove.
Place the new part over the Internal Frame.
Pull the arms up 90° and pull outwards. If it’s difficult to remove, wiggle it when pulling it outwards. Be careful not to damage the Internal Frame.
Pull each part straight in the directions of the arrows to remove them.
① Push down the Internal Frame of Thigh to make the Shin-Connecting Frame protrude.
② Connect it to the Shin Parts. After connecting, push the Shin-Connecting frame back into the thigh.
③ By twisting the shin-adjust the thigh’s internal frame to make a round joint visible.